DEDIPROG

DescriptionUFSProg Series is a professional reader tool to read and write data in each LUN of UFS IC. With a powerful bridge controller IC, DP7000, UFSProg series can support UFS v2.1 up to Gear 3 speed and USB3.1 Gen1 with UASP high-performance protocol. FeatureCompliant with UFS v2.1, which supports HS-Gear3.Compliant with USB v3.1 Gen 1, which supports UASP.Each of LUNs will be enumerated as logic disk under USB mass storage mode.Ｗith UFSProg software, the user can easily get IC information in one step feature or read/write register in the engineering mode.Support IC with or without so

DescriptionUFSProg-CS2 is a professional reader to read and write data in each LUN of UFS IC. With a powerful bridge controller IC, DP7000, UFSProg-CS2 can support UFS v2.1 up to Gear 3 speed and USB3.1 Gen1 with UASP high-performance protocol. FeatureCompliant with UFS v2.1, which supports HS-Gear3.Compliant with USB v3.1 Gen 1, which supports UASP.Each of LUNs will be enumerated as logic disk under USB mass storage mode.With UFSProg software, the user can easily get IC information in one step feature or read/write register in the engineering mode.Support IC with or without solder ball.I

FeatureSF700 is an ALL new designed SPI Flash engineering programmer, which supports all SPI NOR Flash and SPI NAND Flash in the market.SF700 continues to provide strong engineering mode and command line as SF600, DediProg's another programmer, to satisfy the demand for R&D. Apart from the engineering application, SF700 also supports project file for small volume production demand. SF700 can do programming in parallel with multiple programmers or standalone mode. HighlightsHigh-speed programmingBuilt-in high-speed processor to achieve high programming speed. IC TypeIC P/NData Siz

DescriptionFeatureThe SF100 is a high speed "In System Programming" programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.HighlightsUSB InterfaceStart button featureSignal conflict protectionsUpdate Serial Flash soldered on board with application powered or notControl Application, controller reset and MOSFET isolation statusUpdate the internal Flash of Freescale MCU using the Ezport (MCF5223, MCF5221, MCF5213) or th

FeatureEM100Pro-G2 is DediProg SPI NOR Flash emulator integrated high-speed DRAM memory to offer the best code updating performances. This advanced tool has been designed in close cooperation with the SPI NOR Flash suppliers to emulator the behavior of all the SPI NOR Flash on the market and also the next generation SPI NOR Flash.It provides engineers with a flexible development and testing tool for any embedded project that uses an external SPI NOR Flash. It provides quick, in-circuit firmware test cycles during development.EM100Pro-G2 increases productivity by downloading firmware code or da

DescriptionIn System Programming (ISP) method Description:Update your SPI Flash soldered on your application board by using our dedicated programmers: SF100 and SF100+. When connected to the application board, the SF100 programmer can control the SPI bus to read or update the Serial Flash content in a very short time. BenefitsIn System Programming method will offer you and your customers, the highest flexibility and performances for the update of the Serial Flash soldered on board. It will for sure be highly beneficial for development, debugging, production and repairing allowing to reduc

Model Name : SFDK01-G2SPI Flash Development Kit (SF100)FacebookTwittergoogle_plusLinkedInSina WeiboWeChatEmail This item is unavailable for online purchase.Service ContactDescriptionMediaECNDownloadFeatureSPI Flash Development kit gives engineers the total solution while working on firmware development based on the SPI flash memories. This kit combines all the accessories of EM100Pro-G2 and SF100 and gives the users greater price advantages than purchasing separately. For more information, please visit SF100 and EM100Pro-G2 product page. Standard PackageSF100 and its accessories x 1E

SPI Flash Development Kit (SF600)Model Name : SFDK02-G2SPI Flash Development Kit (SF600)FacebookTwittergoogle_plusLinkedInSina WeiboWeChatEmail This item is unavailable for online purchase.Service ContactDescriptionMediaECNDownloadFeatureSPI Flash Development kit gives engineers the total solution while working on firmware development based on the SPI flash memories. This kit combines all the accessories of EM100Pro-G2 and SF600 and gives the users greater price advantages than purchasing separately. For more information, please visit SF600 and EM100Pro-G2 product page. Standard Pack

FeatureNuProg-F8 is a combination of programmer and duplicator, which is unique in the current market. NuProg-F8 has nine socket sites; one is for programming the master IC and the other eights are for duplicating the slave ICs. The Master IC can be programmed with the files in the software (Dediware) while the slave IC can be duplicated with Master IC in stand-alone mode. With NuProg-F8, you will be able to program or duplicate on the same machine.Data Transfer Speed is at 180MB/s max. The real read/write speed depends on various factors such as communication protocol, chip con

FeatureeMMC-F8 is a combination of programmer and duplicator, which is unique in the current market. It has nine socket sites; one is for programming the master IC and the other eights are for duplicating the slave ICs. The Master IC can be programmed with the files in the software (Dediware) while the slave IC can be duplicated with Master IC in stand-alone mode. With eMMC-F8, you will be able to program or duplicate on the same machine.Data Transfer Speed is at 100MB/s max. The real read/write speed depends on various factors such as communication protocol, chip controller per

FeatureNuProg-F8A is the new generation UFS/eMMC gang duplicator. Support UFS v2.1 and eMMC v5.1 storage IC. All new design architecture makes the machine into the compact size. NuProg-F8A supports multiple machines in one PC. User can duplicate the IC from NuProg-E to several NuProg-F8A for small volume production demand.Data Transfer Speed is at 180MB/s max. The real read/write speed depends on various factors such as communication protocol, chip controller performance, and NAND technology, etc.HighlightsSupport UFS v2.0/v2.1 and eMMC v5.1 storage ICUFS duplicating supports LUN con

DescriptionFeatureSF600Plus is high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.SF600Plus combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.SF600Plus is an upgrade version of SF600. The main difference is that SF600Plus embeds an 8GB memory, which allows standalone programming.Hig

SF600 SPI Flash IC ProgrammerThe SF600 is a high speed In System Programming (or ISP) programmer designed to update the SPI Flash soldered on board (In Circuit Programming) or in the separately available socket adaptors (Off line programming).Contact us if you need a socket adapter for your chip.The programmer is easily controlled by the DediProg Software through the USB bus offering friendly interface and powerful features to users.Powered by USB - additional power supply is available for stand alone programming. The SF600 combines the advantages of SF100 with additional improvements: Hi

DescriptionThe Backup Boot Flash Kit (SO16W) is used as a Serial Flash Emulator for easy code development to reduce your time to market. OurBackup Boot Flash Module (included) can be connected to the application by 2 different methods:On the Main Serial flash package soldered on board by using our SO16W Test Clip (included).On your application 2.54mm (2X5) BBF connector (if application designed with) by using the appropriate BBF cable (included).Your application will work automatically on the backup SPI Flash inserted in our tool is SO16Wsocket that

DescriptionThe Backup Boot Flash Kit (SO8W) is used as a Serial Flash Emulator for easy code development to reduce your time to market. Our Backup Boot Flash Module (included) can be connected to the application by 3 different methods:On the Main Serial flash package soldered on board by using our BBF Test Clip(SO8)(included).On our SMT 1.27mm Pin Header (included) soldered in place of the Main Serial flash footprint for a better stability by using the appropriate BBF cable (included).On your application 2.54mm (2X5) BBF connector (if application de

Brand Name :DedeprogModel Number :K110Place of Origin :TaiwanMOQ :1set min.Price :USD688/SETPayment Terms :T/T,PAYPALSupply Ability :4500SET/,MONTNDelivery Time :2DAYS AFTER PAYMENTPackaging Details :ORIGINAL STANDARD DISTRIBUTION CARTON BAX PACKINGCertification :ROHS, CE, ISO14000programmer :dediprog K110program :K110 supports all Flash IC.Dediprog :K110 flash IC ProgrammerFeatureK110 is an engineering IC programmer that supports the majority Flash ICs on the market. Powered by USB port and does not need external power, also provides Command Line for software redevelopment. Palm-size and spac

{{item.prod_desc}}